Call Us: 513-239-7494
(8:30am-5pm EST Monday - Friday)

465 Digital Indicator

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Designed to outperform and outlast all comparable indicators, the GSE Model 460 and GSE Model 465 offer unparalleled performance and value. Equipped with the industries most sophisticated parameter map and programmable features, the 460 series indicators deliver easy to use operation with the flexibility to meet your application requirements now and in the future.

GSE Model 460 and GSE Model 465 Series Digital Indicator Highlights

  • Truck Weighing Programs
  • Checkweighing Routines
  • Parts Counting & Inventory Control
  • Filling and Batching
  • Multi-Range Scale Indication
  • Peak Weight Hold

Exceptional Features Common to 460/465

Macros
15 programmable macros, applies the principles of Boolean logic in a sequential structure, provides a method of performing repetitive keystrokes and operations, simplifies indicator use by automating indicator operation

Database
15 programmable databases are used to manage critical application data, this powerful feature stores weight information and other user defined Data Registers such as part numbers, formulas, etc., 18 functions include store, recall, sort, upload

Data Registers
15 programmable data registers can be defined as an integer, unsigned integer, float or string, common data registers include part number, lot #, Operator ID, commodity code, etc.

Communications
A factory default transmission will send: Gross, net and tare weights. Using the Custom Transmit Tables, other transmissions may be programmed to send weight data, Data Registers or ASCII control codes for application specific labels, reports, etc.

Input Interpreter Tables
Input Interpreter Tables are programmed to receive RS232 serial data and perform a specific task, i.e. a bar code scanner scans a formula #, the data is received into an input interpreter table and invokes a macro that recalls target weights

Enclosure
NEMA 4X (IP66), stainless steel

Display
Bright 6 digit .75" (20.3mm) Vacuum Fluorescent (VFD) with 2x5 (10 character) 
dot matrix for scale status and operator prompting

Remote Display Mode 
Allows any GSE 60 series indicator to operate as a remote display (slave device), keypad can be enabled or disabled

Check Weigh
Set target weight(s) and tolerances, indicator identifies out of specification weighments, database can be utilized to quickly recall product target weights and tolerances 

Batching 
Single Speed: 1-8 ingredients with Pre-Act. 
Two Speed: 1-4 ingredients with dribble

Model 465 Indicator


Keypad – 
22 key, durable elastomeric (rubber)

Size – 
11.01" W (27.98cm) x 8.96" H (22.76cm)

Weight – 
7 lb (3.18kg)

Truck Weighing – 
truck weigh in/out routine provides a minimum 200 truck ID’s, additional truck routines may be programmed per requirements.

Average Piece Weight (APW) Recall – 
key in a part number and recall the associated APW for quick, efficient parts counting, provides storage of a minimum 200 APW’s 

Model 460 Indicator


Keypad – 
5 key, durable elastomeric (rubber)
Size – 
11.01" W (27.98cm) x 7.24" H (18.39cm)
Weight – 
6.5 lb (2.95kg) 

Model Options and Accessories


Multi-Scale Module [SBM] – 
allows for simultaneous monitoring of an additional signal input

Analog Output Module [SBM] – 
isolated 16-bit signal output, 0-10VDC, 0-20mA or 4-20mA, software adj. zero/gain (2 analog modules max.)

I/O Relay Module [SBM] – 
8 Variations of Quad I/O boards. (AC & DC – 4 Output, 4 Input or 2 In / 2 Out)

RS485 Module – 
isolated serial communication module replaces RS232 on Port 1, multi-drop with 251 devices max, half or full duplex up to 4000 feet, 56K bps max

20mA Current Loop – 
isolated serial communication module replaces RS232 on Port 1, TX- Active or Passive, RX-Passive, 9600 bps max, 12 VDC, 1000 foot loop

Alpha Keyboard – 
allows alpha character entry into data registers such as Product Name, Part Number, etc.

Dura-Shield – 
0.020" layer of weatherable film lexan with adhesive backing, applied to the front of the indicator, keeps display and keypad clean in extreme environments

GSE ReFlash Software – 
download firmware enhancements via RS232 port

BDM Flash Software – 
download firmware enhancements via BDM port and recall the associated APW for quick, efficient parts counting, provides storage of a minimum 200 APW’s 
Note: 1 serial bus module [SBM] and 1 communication module mount internal to the enclosure.

Performance


Resolution - 
100,000d (+/-500,000 internal)
A/D Conversation - 
60 Hz
Flash Memory - 
512k Bytes
A/D Filtering 
GSE FIR (Finite Input Response) Filter with selectable display update rate
Units of Measure - 
4 user defined per scale
Custom Units - 
2 user defined per scale (ie. Tons)
Span Adjustment - 
0.1 – 20mV/V
Non-Linearity - 
0.005%FS, L.C. Dependent
Operating Temp 
-10C - +40C
Excitation Power 
12 – 350 ohm bridges
Input Signal - 
Connect 4 or 6 conductors with sense leads
Excitation Current - 
350 mA, short circuit protected
Excitation Voltage - 
10VDC short circuit protected
Time/Date - 
Clock Volatile, battery backed optional
Warranty - 
2 Year limited


Electrical


Power Input 
AC - 90 - 250VAC, 50/60Hz
Power Input 
DC - 10 – 32VDC
Fuse - 
0.5A Slow-Blow (when using AC power)


Setpoint I/O


I/O Scan Rate - 
16ms maximum
Number of I/O - 
8 maximum physical, optional 16 Total (8 physical, 8 logical)
Output Voltage Rating - 
20 – 240 VAC @1A 
30 – 60 VAC @2A
Input Voltage Rating
60 – 135 VAC 
200 – 250 VAC 
3 – 30 VDC
I/O Timer Resolution -
10ms
Remote Contact Input - 
2 total for TARE, PRINT, START, STOP, etc. 
Invokes macros 6 & 7 if programmed.
Port 1 - 
RS232 Full Duplex or RS485 - Multi-drop optional or 20mA Current Loop optional
Port 2 - 
RS232 Full Duplex, no RTS on COMM 2
Protocols - 
Modbus TM
Baud Rates -
150 – 58,300K bps
Custom Transmit Tables 
4 - user defined RS-232 output tables
Input Interpreter Tables 
15 - user defined RS-232 input tables
Maximum: 
128 Inputs/outputs
Voltage ratings: 
3 VDC - 250 VAC @ 3A
I/O Timer Resolution: 
10 ms

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.